specification control drawing raychem thermofit devices raychem corporation 300 constitution drive menlo park, ca 94025 usa title: soldersleeve shield terminator unless otherwise specified dime nsions are in millimeters. inches dimensions are between brackets. document no. : d-108-00/-01/-02/-03 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron raychem reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. dcr number: d980867 replaces: d961392 drawn by: m. foronda date: 04/09/98 prod. rev. see table doc issue: 3 scale: none size: a sheet: 1 of 1 if this document is printed it becomes unc ontrolled. check for the latest revision. product revision product dimensions product name l max ?a min ?b min d-108-00 f 17.25 (0.680) 1.9 (0.075) 2.4 (0.095) d-108-01 f 17.25 (0.680) 2.8 (0.110) 3.15 (0.125) D-108-02 e 17.25 (0.680) 4.4 (0.175) 5.0 (0.200) d-108-03 f 20.5 (0.810) 7.1 (0.280) 7.6 (0.300) material 1. insulation sleeve: heat-shrinkable, radiation cross-linked polyvinylidene flouride. transparent blue. 2. solder preform with flux: solder: sn96 ag4 per ansi j-std-006. flux: rol1 per ansi j-std-004. 3 & 4. meltable inserts: polyolefin-b ased thermoplastic. color : red. notes a. the parts covered by this scd are for use in attaching a ground wire to the shield of a cable. they may be used on cables rated for at least 135 c minimum, having silver plated copper shields and meeting the dimensional criteria shown in the table. b. parts will meet requirements of raychem speci fication rt-1404 and nationa l aerospace standard nas-1747 when installed per raychem-approved convection or infrared tools in accordance with raychem assembly procedure rcps-100-70. temperature rating: -55 c to +175 c.
|